Do you need the area of concentration for waec physics examination? Well, I am glad to inform you that you have come to the right place. Perhaps you might be wondering what does an area of concentration means. An area of concentration means those topics that do come out every year for physics examination, and you must ensure you read it over and over again so you can be well prepared for the upcoming examination. This is also called waec physics syllabus.
Note: it does not mean you won’t read other topics on the area of concentration for waec physics examination, actually you need to. So that you can be better than the best.
Things you should know about the area of concentration for waec physics syllabus
- You should note that area of concentration for your physics examination will set you on the right path and it will ensure you cover those pressing topics you need to cover without leaving anything at stake.
- It helps you to prepare better because you already know what is trending
- It helps you to be better than your mates because you have a secret weapon they don’t have.
Having known all this, are you still dulling. Well if you have been dulling all this time, now you should not because you already know-how area of concentration for your physics examination will help you to score higher and become one of the best. Sincerely, there is no secret about it.
A wise man once said a man who knows the way is the one that knows book.How hilarious…
Now, having had a glimpse of the idea of how important area of concentration is, let’s move on to the tips you should note for your upcoming waec physics examination.
Tips you should note before writing that physics examination
- When you have less than 20 minutes to the end of the papers and you discovered you still have so many difficult questions that you have not answered, then you should ensure you use the prediction method.
- Never should you leave any questions unanswered. Even though you don’t know the answer, ensure you guess.
- It is advisable to start answering the simplest questions before moving on to the hard ones.
- Read and understand the questions properly before selecting an answer, ensure you note this.
- Do not waste much time on a particular question, if you don’t know one, then move on to the next one but in case you don’t have time, just guess.
- Evaluate each answer after reading the questions and understanding what it is telling you to do. Evaluate each answer as this will help you to discover the answer you should choose. There are some times whereby you will have two close answers, in this case, take a deep breath, relax and pray, then choose the option that inner mind tells you to choose, it normally ends up mostly to be the right answer.
- Remove each wrong answer from the option to get the right answer.
You can download your physics area of concentration here
Tips on how to cover physics waec syllabus within two weeks.
- Go through the syllabus thoroughly.
- Collect necessary studying materials needed from different sources
- Visit different websites and textbooks to gain more knowledge and to make your necessary contribution if needed.
- Make your personal notes on every topic you read. This will help a lot.
- Make important points and make use of initials too so you can be able to remember what you ought to remember.
- Form a valid abbreviation for yourself and use them to study.
- Having too many textbooks will confuse you and give you a burden.
- You must find solutions to all problems met when reading or solving.
- Ensure you jot down the salient point and have your personal notebook while reading, this will keep you on managing your time.
- Practise at least 5 previous years past questions so you can see the format waec set its questions. Also, ensure you get the right answers to the questions.
- Read efficient textbooks and also ensure to read the textbooks that explain better, that enables you to grasp the subject matter very well.
- First, choose the easy topic that you know you can understand properly within a twinkle of an eye. You should complete the easy topic first, you can complete this in no time.
- After that, first, try to read the book and take short notes on that book.
- If you are preparing for waec exam, they sit down and analyze past questions of waec to see the format in which waec sets its question.
- Focus more on those topics that are repeated frequently in the past questions.
- Don’t be a jack of all trade by trying to remember everything. Instead, you should understand the concept, once you understand the concept, you can put it down in your own way.
- Ensure you take short and long breaks while studying.
- Engage in meaningful conversation with your friends to share knowledge and gain more knowledge since nobody is a mountain of knowledge.
- Ensure you don’t stress your brain too much by loading it with knowledge even when you ought to be sleeping. Ensure you sleep when you ought to.
- Get a mentor who will advise you on what and what you ought not to do. Ensure your mentor is someone who is successful and someone you can look up to.
- Ask for feedback from your mentor or your teachers on how far you are performing.
- Make reliable and realistic goals every day and achieve them.
- Form your own note as you study.
Other materials you should ensure you use while preparing for your waec chemistry examination to come out in flying colours.
- Pray to your maker: Always ensure you pray to your maker before and after reading and also pray to him before and after your exams. Many students think they can pass on their own and therefore neglect the God factor. That will bring them failure of course because even the bible confirms it, lean not on your own understanding.
- Waec past questions and answers: when using waec questions, ensure you solve those questions on your own before checking the answer. Also ensure that the ones you don’t know or the one you are not sure of, make sure you give your teachers or people who are better than you in physics to put you through. Don’t always rely on the past question answer, some of them are not correct. Ensure you find the correct answers to all the questions.
- Physics textbook for waec: when using any physics textbook, ensure you read the ones that you find it easy to remember. Don’t read the ones you find it hard to read as doing this could lead you to fail your exams woefully.
Things you will see on your area of concentration for your upcoming physics waec examination
- It is the simplest, easiest things or materials you will see forgetting vital information for your upcoming exam.
When we talk about the area of concentration, we are also talking about waec syllabus for physics examination. Hence, it contains vital information on the topics to be read, contents of the topics e.t.c
- It is free of charge and very accessible once you have data on your phone, you can browse it online, just like you are doing here. hence it is free of charge and very accessible.
- It contains information on all what you need to cover before writing the exam, that will set you ahead of others.
Why you need waec physics area of concentration/syllabus as a student
- Get important information concerning each topics aims and objectives.
- Have a general knowledge concerning where waec normally sets their questions from.
- Know the contents that are within each topic.
- It will guide you to know about the short notes and recommended textbooks needed for the exams.
- It will also lead you to know you can download it online without having to go through stress before getting it. It is very accessible.
- The objectives of waec physics area of concentration
- To have a vital computational skill in solving any problems
- To have the necessary logical reasoning in solving any problems
- To prepare candidates so that they can know where to get an area of concentration, they can rely on.
- To ensure that the objectives of each topic are well understood and well taught to the students
- To apply these principles and theories taught to everyday life.
- Waec physics examination pattern
- Answering waec examination is easy, all candidates need to do is to recognise and to be able to have a good knowledge of the subject matter.
- Waec questions are indifferent, some could be true or false, while some could be multiple choice and the rest.
- Waec questions tend to cover more materials than waec essays, I hope you know that, if not. Ensure you know that now.
- Waec questions have only one correct answer.
- Waec requires strict preparation and well-versed knowledge of the subject matter.
You can download the physics area of concentration for waec here.
Haven gave you the areas of concentration for waec physics and highlighted to you some very key areas to read for waec physics exam in 2021 otherwise known as waec physics syllabus. It will do well also for you to check out some other waec areas of concentration for other topics. You check here for areas of concentration for waec English, areas for concentration for waec chemistry. We can guarantee that if these steps and advice are duly followed, getting a good grade in your forthcoming waec exam will not be a stress.
2021/2022 WAEC Physics Syllabus
The aims of the syllabus are to:
(1) acquire a proper understanding of the basic principles and applications of Physics;
(2) develop scientific skills and attitudes as pre-requisites for further scientific activities;
(3) recognize the usefulness, and limitations of the scientific method to appreciate its applicability in other disciplines and in everyday life;
(4) develop abilities, attitudes and skills that encourage efficient and safe practice;
(5) develop attitudes relevant to science such as concern for accuracy and precision, objectivity, integrity, initiative and inventiveness.
The following skills appropriate to Physics will be tested:
(1) Knowledge and understanding:
Candidates should be able to demonstrate knowledge and understanding of:
- (a) scientific phenomena, facts, laws, definitions, concepts and theories;
- (b) scientific vocabulary, terminology and conventions (including symbols, quantities and units);
- (c) the use of scientific apparatus, including techniques of operation and aspects of safety;
- (d) scientific quantities and their determinations;
- (e) scientific and technological applications with their social, economic and environmental implications.
(2) Information Handling and Problem-solving
Candidates should be able, using visual, oral, aural and written (including symbolic, diagrammatic, graphical and numerical) information to:
- (a) locate, select, organise and present information from a variety of sources, including everyday experience;
- (b) translate information from one form to another;
- (c) analyse and evaluate information and other data;
- (d) use the information to identify patterns, report trends and draw inferences;
- (e) present reasonable explanations for natural occurrences, patterns and relationships;
- (f) make predictions from data.
(3) Experimental and Problem-Solving Techniques
Candidates should be able to:
(a) follow instructions;
(b) carry out experimental procedures using apparatus;
(c) make and record observations, measurements and estimates with due regard to precision, accuracy and units;
(d) interpret, evaluate and report on observations and experimental data;
(e) identify problems, plan and carry out investigations, including the selection of techniques, apparatus, measuring devices and materials;
(f) evaluate methods and suggest possible improvements;
(g) state and explain the necessary precautions taken in experiments to obtain accurate results.
There will be two papers both of which must be taken for a total mark of 160. Candidates will be allowed an extra 15 minutes for reading Paper 1 during which they are not expected to write anything.
PAPER 1: will be a practical test lasting 2¾ hours comprising three questions out of which candidates will answer any two to score a total mark of 50. The paper will be taken by school candidates only. Each question of this paper will have two parts: A and B.
(1) Part A will be an experiment for 21 marks. Candidates will be required to state the precautions taken during the experiments and reasons for such precautions.
(2) Part B will consist of two short-answer questions that are related to the experiment for 4 marks.
PAPER 2: will consist of two sections: A and B which will last for 2¾ hours.
Section A will comprise 50 multiple-choice objective questions drawn from the common areas of the syllabus. It will last for 1¼ hours for 50 marks.
Section B will last for 1½ hours and will comprise of two parts: I and II.
Part I will comprise ten (10) short-structured questions drawn from the portions of the syllabus peculiar to the different countries such that candidates from each member country will be able to answer five (5) questions for 15 marks.
Part II will comprise five (5) essay-type questions drawn from the common areas of the syllabus. Candidates will be required to answer three (3) questions for 45 marks.
PAPER 3: will be an alternative test to Paper 1 for private candidates only. It will be a Test-of-Practical work lasting 2¾ hours for 50 marks.
This will be tested by a practical examination based on the syllabus. The objective of the practical examination is to test how well the candidates understand the nature of the scientific investigation and their capability in handling simple apparatus in an experiment to determine an answer to a practical question. It is also to determine their competence in demonstrating their understanding of some of the principles involved in a small-scale laboratory experiment.
The practical test will contain enough instructions to enable candidates to carry out the experiment. Even when standard experiments, such as the determination of focal lengths or specific heat capacities are set, candidates will be told what readings to take and how to calculate the result. Therefore, it should not be necessary for candidates to learn by heart how to perform any experiment.
In addition to experiments on the topics in the syllabus, candidates may be asked to carry out with the aid of full instructions, variants of standard experiments. Candidates should be trained to take as varied a set of readings as possible and to set out the actually observed readings systematically on the answer sheet. The experiments may require a repetition of readings and an exhibition of results graphically and their interpretation.
It is important that candidates are involved in practical activities in covering this syllabus. Candidates will be expected to answer questions on the topics set out in the column headed ‘TOPICS’. The ‘NOTES’ are intended to indicate the scope of the questions which will be set but they are not to be considered as an exhaustive list of limitations and illustrations.
N.B. Questions will be set in S.I. units. However, multiples or sub-multiples of the units may be used.
- Concepts of matter
- Fundamental and derived quantities and units
- (a) Fundamental quantities and units
- (b) Derived quantities and unit
- Position, distance and displacement.
(a) Concept of position as a location of point – rectangular coordinates.
(b) Measurement of distance
(c) Concept of direction as a way of locating a point – bearing
(d) Distinction between distance and displacement
Simple structure of matter should be discussed. The three states of matter, namely solid, liquid and gas. Evidence of the particle nature of matter e.g. Brownian motion experiment, Kinetic theory of matter. Use of the theory to explain: states of matter (solid, liquid and gas), pressure in a gas, evaporation and boiling; cohesion, adhesion, capillarity. Crystalline and amorphous substances to be compared (Arrangement of atoms in crystalline structure not required.)
Length, mass, and time as examples of fundamental quantities and m, kg and s as their respective units. Volume, density and speed as derived quantities and m3, kgm-3 and ms-1 as their respective units. Position of objects in space using the X,Y,Z axes can be mentioned.
Use of string, metre rule, vernier callipers and micrometer screw gauge. Degree of accuracy should be noted. Metre (m) as unit of distance. Use of compass and a protractor. Graphical location and directions by axes to be stressed.
- Mass and weight Distinction between mass and weight
(a) Concept of time as interval between physical events
(b) Measurement of time
- Fluids at rest
(a) Volume, density and relative density
(b) Pressure in fluids
(c) Equilibrium of bodies
- (i) Archimedes’ principle
- (ii) Law of flotation
Use of lever balance and chemical/beam balance to measure mass and spring balance to measure weight. Kilogram (kg) as the unit of mass and newton (N) as the unit of weight.
The use of heart-beat, sand-clock, ticker-timer, pendulum and stopwatch/clock. Seconds (s) as units of time. Experimental determination for solids and liquids.
Concept and definition of pressure. Pascal’s principle, application of the principle to the hydraulic press and car brakes. Dependence of pressure on the depth of a point below a liquid surface. Atmospheric pressure. Simple barometer, manometer, siphon, syringes and pumps, determination of the relative density of liquids with U-tube and Hare’s apparatus.
Identification of the forces acting on a body partially or completely immersed in a fluid.
Use of the principle to determine the relative densities of solids and liquids.
Establishing the conditions for a body to float in a fluid. Applications in hydrometer, balloons, boats, ships, submarines etc.
(a) Types of motion: Random, rectilinear, translational, rotational, circular, orbital, spin, oscillatory
(b) Relative motion
(c) Cause of motion
(d) Types of force:
- (i) Contact force
- (ii) Force Field
(e) Solid friction
(f) Friction in fluids (Viscosity)
(g) Simple ideas of circular motion
Only qualitative treatment is required. The illustration should be given for the various types of motion.
Numerical problems on co-linear motion may be set. Force as a cause of motion. Push and pull.
Electric and magnetic attractions and repulsion; gravitational pull.
The frictional force between two stationary bodies (static) and between two bodies in relative motion (dynamic). Coefficients of limiting friction and their determination. Advantages of friction e.g. in locomotion, friction belt, grindstone. Disadvantages of friction e.g. reduction of efficiency, wear and tear of machines. Methods of reducing friction. Use of ball bearings, rollers and lubrication.
Definition and effects. A simple explanation as an extension of friction in fluids. Fluid friction and its application in lubrication should be treated qualitatively. Terminal velocity and its determination.
Experiments with a string tied to a stone at one end and whirled around should be carried out to
(i) demonstrate motion in a vertical/horizontal circle.
- Speed and velocity
(a) Concept of speed as a change of distance with time
(b) Concept of velocity as a change of displacement with time
(c) Uniform/non-uniform speed/velocity
(d) Distance/displacement-time graph
- Rectilinear acceleration
(a) Concept of acceleration as a change of velocity with time.
(b) Uniform/non-uniform acceleration
(c) Velocity-time graph,
(d) Equations of motion with constant acceleration;
- (i) Gravitational acceleration as a special case.
- (ii) show the difference between angular speed and velocity.
- (iii) show centripetal force. Banking of roads in reducing sideways friction should be qualitatively discussed.
Metre per second (ms-1) as a unit of speed/velocity. Ticker-timer or similar devices should be used to determine speed/velocity. Definition of velocity as ds/dt. Determination of instantaneous speed/velocity from distance/displacement-time graph and by calculation.
Unit of acceleration as ms-2. Ticker timer or similar devices should be used to determine acceleration. Definition of acceleration as dv/dt. Determination of acceleration and displacement from velocity-time graph Use of equations to solve numerical problems.
- Scalars and vectors
(a) concept of scalars as physical quantities with magnitude and no direction
(b) concept of vectors as physical quantities with both magnitude and direction.
(c) Vector representation
(d) Addition of vectors
(e) Resolution of vectors
(f) Resultant velocity using vector representation.
- Equilibrium of forces
(a) Principle of moments
(b) Conditions for an equilibrium of rigid bodies under the action of parallel and non-parallel forces.
(c) Centre of gravity and stability
- Simple harmonic motion
(a) Illustration, explanation and definition of simple harmonic motion (S.H.M.) Mass, distance, speed and time as examples of scalars. Weight, displacement, velocity, and acceleration as examples of vectors. Use of force board to determine the resultant of two forces. Obtain the resultant of two velocities analytically and graphically.Moment of force/Torque. Simple treatment of a couple, e.g. turning of water tap, corkscrew, etc. Use of force board to determine resultant and equilibrant forces. Treatment should include resolution of forces into two perpendicular directions and composition of forces. Parallelogram of forces. Triangle of forces should be treated experimentally. Treatment should include stable, unstable and neutral equilibria. Use of a loaded test-tube oscillating vertically in a liquid, simple pendulum, spiral spring and bifilar suspension to demonstrate simple harmonic motion.
(b) Speed and acceleration of S.H.M.
(c) Period, frequency and amplitude of a body executing S.H.M.
(d) Energy of S.H.M.
(e) Forced vibration and resonance
- Newton’s laws of motion:
(a) First Law: Inertia of rest and inertia of motion
(b) Second Law: Force, acceleration, momentum and impulse
(c) Third Law: Action and reaction
Relate linear and angular speeds, linear and angular accelerations. Experimental determination of ‘g’ with the simple pendulum and helical spring. The theory of the principles should be treated but
the derivation of the formula for ‘g’ is not required. Simple problems may be set on simple harmonic motion. Mathematical proof of simple harmonic motion in respect of spiral spring, bililar suspension and loaded test-tube is not required.
The distinction between inertial mass and weight. Use of timing devices e.g. ticker-timer to determine the acceleration of a falling body and the relationship when the accelerating force is constant.
Linear momentum and its conservation. The collision of elastic bodies in a straight line.
Applications: recoil of a gun, jet and rocket propulsions.
ENERGY: Mechanical and Heat
(a) Forms of energy
(b) World energy resources
(c) Conservation of energy
- Work, Energy and Power
(a) Concept of work as a measure of energy transfer
(b) Concept of energy as the capability to do work
(c) Work done in a gravitational field.
(d) Types of mechanical energy
- (i) Potential energy (P.E.)
- (ii) Kinetic energy (K.E.)
(e) Conservation of mechanical energy.
Examples of various forms of energy should be mentioned e.g. mechanical (potential and kinetic), heat, chemical, electrical, light, sound, nuclear etc. Renewable (e.g. solar, wind, tides, hydro,
ocean waves) and non-renewable (e.g. petroleum, coal, nuclear, Biomass). Sources of energy should be discussed briefly. Statement of the principle of conservation of energy and its use in explaining energy transformations.
- Unit of work as the joule (J)
- Unit of energy is the joule (J) while the unit of electrical consumption is kWh.
- Work done in lifting a body and by falling bodies.
- Derivation of P.E. and K.E. is expected to be known. Identification of types of energy
- possessed by a body under given conditions.
- Verification of the principle
(f) Concept of power as the time rate of doing work.
(g) Application of mechanical energy – machines. Levers, pulleys, inclined plane, wedge, screw, wheel and axle, gears.
- Heat Energy
(a) Temperature and its measurement
(b) Effects of heat on matter e.g.
- (i) Rise in temperature
- (ii) Change of state
- (iii) Expansion
- (iv) Change of resistance
(c) Thermal expansion – Linear, area and volume expansiveness, Unit of power as the watt (W).
The force ratio (F.R.), mechanical advantage (M.A.), velocity ratio (V.R.) and efficiency of each machine should be treated. Identification of simple machines that make up a given complicated machine e.g. bicycle. Effects of friction on machines. Reduction of friction in machines.
Concept of temperature as the degree of hotness or coldness of a body. Construction and
graduation of a simple thermometer. Properties of thermometric liquids. The following thermometers should be treated:
– volume gas thermometer, resistance thermometer, thermocouple, liquid-in-glass thermometer including maximum and minimum thermometer and clinical thermometer.
- Pyrometer should be mentioned.
- Celsius and Absolute scales of temperature.
- Kelvin and degree Celsius as units of temperature. Use of the Kinetic theory to explain the effects of heat.
- Qualitative and quantitative treatment.
- Consequences and applications of expansions.
- Expansion in buildings and bridges, bimetallic strips, thermostat, over-head cables causing sagging and in railway lines causing buckling.
- Real and apparent expansion of liquids. Anomalous expansion of water.
(d) Heat transfer –
Conduction, convection and radiation
(e) The gas laws-Boyle’s law, Charles’ law, pressure law and general gas law
(f) Measurement of heat energy:
- (i) Concept of heat capacity
- (ii) Specific heat capacity
(g) Latent heat
(i) Concept of latent heat
(ii) Melting point and boiling point
(iii) Specific latent heat of fusion and of vaporization Per kelvin (K-1) as the unit of expansivity.
Use of the kinetic theory to explain the modes of heat transfer. Simple experimental illustrations. Treatment should include the explanation of land and sea breezes, ventilation and applications in cooling devices. The vacuum flask. The laws should be verified using simple apparatus. Use of the kinetic theory to explain the laws. Simple problems may be set.
- Use of the method of mixtures and the electrical method to determine the specific heat capacities of solids and liquids. Land and sea breezes related to the specific heat capacity of water and land, Jkg-1 K-1 as unit of specific heat capacity.
- Explanation and types of latent heat.
- Determination of the melting point of a solid and the boiling point of a liquid. Effects of impurities and pressure on melting and boiling points. Application in pressure cooker.
- Use of the method of mixtures and the electrical method to determine the specific latent heat of fusion of ice and of vaporization of steam. Applications in refrigerators and air conditioners.
- Jkg-1 as unit of specific latent heat.
(h) Evaporation and boiling
(i) Vapour and vapour pressure
(j) Humidity, relative humidity and dew point
(k) Humidity and the weather
Effect of temperature, humidity, surface area and draught on evaporation to be discussed.
Explanation of vapour and vapour pressure. Demonstration of vapour pressure using
simple experiments. Saturated vapour pressure and its relation to boiling.
Measurement of dew point and relative humidity. Estimation of humidity of the atmosphere using wet and dry-bulb hygrometer. Formation of dew, fog and rain.
- Production and propagation of waves
(a) Production and propagation of mechanical waves
(b) Pulsating system: Energy transmitted with definite speed, frequency and wavelength
(c) Wave form period (T) and velocity (v)l(d) Mathematical relationship connecting frequency (f), wavelength
- Types of waves
(a) Transverse, longitudinal and stationary waves
(b) Mathematical representation of wave motion.
- Properties of waves:
Reflection, refraction, diffraction, interference, superposition of progressive waves producing standing/stationary waves.
- Light waves
(a) Sources of light
Use of ropes and springs (slinky) to generate mechanical waves.
Use of ripple tank to show water waves and to demonstrate energy propagation by waves.
Hertz (Hz) as unit of frequency.
Description and graphical representation.
Amplitude, wavelength, frequency and period.
Sound and light as wave phenomena.
and T = 1. Simple problems may be set.lv = f
Examples to be given.
- x) to be explainedpEquation y = A sin (wt+ 2
Questions on phase difference will not be set.
Ripple tank should be extensively used to demonstrate these properties with plane and circular waves. Explanation of the properties.
Natural and artificial. Luminous and non-luminous bodies.
(b) Rectilinear propagation of light
(c) Reflection of light at plane surface: plane mirror
(d) Reflection of light at curvedsurfaces: concave and convex mirrors
(e) Refraction of light at plane surfaces: rectangular glass prism (block) and triangular prism.
(f) Refraction of light at curved surfaces: Converging and diverging lenses
Formation of shadows and eclipse. Pinhole camera. Simple numerical problems may be set.
Regular and irregular reflection. Verification of laws of reflection. Formation of images.
Inclined plane mirrors. Rotation of mirrors. Applications in periscope, sextant and kaleidoscope.
Laws of reflection. Formation of images. Characteristics of images. Use of mirror formulae: 1 + 1 = 1 and magnification m = v to solve u v f u numerical problems (Derivation of formulae is not required)
Experimental determination of the focal length of concave mirror. Applications in searchlight, parabolic and driving mirrors, car headlamps, etc. Laws of refraction. Formation of images, Real
and Apparent depth. Critical angle and total internal reflection. Lateral displacement and
angle of deviation. Use of minimum deviation equation:
sin (A + D m)
(Derivation of the formula is not required)
Applications: periscope, prism binoculars, optical fibres. The mirage.
Formation of images. Use of lens formulae 1 + 1 = 1 and magnification v to solve u v f u numerical problems.
(g) Application of lenses in optical instruments.
(h) Dispersion of white light by a triangular glass prism.
- Electromagnetic waves:
Types of radiation in the electromagnetic spectrum
- Sound Waves
(a) Sources of sound
(b) Transmission of sound waves
(c) Speed of sound in solid, liquid and air
(d) Echoes and reverberation
(e) Noise and music
(f) Characteristics of sound (Derivation of the formulae not required).
Experimental determination of the focal length of a converging lens. Power of lens in dioptres D. Simple camera, the human eye, film projector, simple and compound microscopes, terrestrial
and astronomical telescopes. Angular magnification. Prism binoculars. The structure and function of the camera and the human eye should be compared. Defects of the human eye and their corrections.
Production of the pure spectrum of white light. Recombination of the components of the spectrum. Colour of objects. Mixing coloured lights. Elementary description and uses of various types of radiation: Radio, infrared, visible light, ultra-violet, X-rays, gamma rays. Experiment to show that a material medium is required. To be compared. Dependence of velocity of sound on temperature and pressure to be considered.
Use of echoes in mineral exploration, and determination of ocean depth. Thunder and multiple reflections in a large room as examples of reverberation. Pitch, loudness and quality
(g) Vibration in strings
(h) Forced vibration
(ii) Harmonics and overtones
(i) Vibration of air in pipe – open and closed pipes
The use of sonometer to demonstrate the dependence of frequency (f) on length (l), tension (T) and linear density (m) of string should be treated. Use of the formula: fo = 1 T: 2lM in solving simple numerical problems. Applications in stringed instruments e.g. guitar, piano, harp, violin etc.
Use of resonance boxes and sonometer to illustrate forced vibration. Use of overtones to explain the quality of a musical note. Applications in percussion instruments e.g. drum, bell, cymbals, xylophone, etc.
in solving numerical problems. End correction is expected. Applications in wind instruments e.g. organ, flute, trumpet, horn, clarinet, saxophone, etc.measurement of velocity of sound in air or frequency of tuning fork using the resonance tube. Use of the relationship v = f
PART IV (FIELDS)
- Description and property of fields.
(a) Concept of fields: Gravitational, electric and magnetic
(b) Properties of a force field
- Gravitational field
(a) Acceleration due to gravity, (g)
(b) Gravitational force between two masses: Newton’s law of gravitation
(c) Gravitational potential and escape velocity.
- Electric Field
(a) Production of electric charges
(b) Types of distribution of charges
(c) Storage of charges
(d) Electric lines of force
Use of compass needle and iron filings to show magnetic field lines. g as gravitational field intensity should be mentioned, g = F/m. Masses include protons, electrons and planets. Universal gravitational constant (G).
Relationship between ‘G’ and ‘g’. Calculation of the escape velocity of a rocket from the earth’s gravitational field. Production by friction, induction and contact. A simple electroscope should be used to detect and compare charges on differently-shaped bodies. Application in light conductors. Determination, properties and field patterns of charges.
(e) Electric force between point charges: Coulomb’s law
(f) Concepts of electric field, electric field intensity
(potential gradient) and electric potential.
(g) Capacitance – Definition, arrangement and application
(2) Current electricity
(a) Production of electric current from primary and secondary cells
(b) Potential difference and electric current
(c) Electric circuit
(d) Electric conduction through materials
(e) Electric energy and power
Permitivity of a medium. Calculation of electric field intensity and electric potential of simple systems. Factors affecting the capacitance of a parallel – plate capacitor. The farad (F) as unit of
capacitance. Capacitors in series and in parallel. Energy stored in a charged capacitor. Uses of
capacitors e.g. in radio, T.V. etc. (Derivation of formulae for capacitance is not required). Simple cell and its defects. Daniell cell, Leclanché cell (wet and dry). Lead-acid accumulator, Alkaline-cadium cell. E.m.f. of a cell, the volt (V) as unit of e.m.f.
) as units of p.d., current and resistance respectively.WOhm’s law and resistance. Verification of Ohm’s law. The volt (V), ampere (A) and ohm (
Series and parallel arrangements of cells and resistors. Lost volt and internal resistance of batteries.
Ohmic and non ohmic conductors. Examples should be given.
Quantitative definition of electrical energy and power. Heating effect of electrical energy and its application. Conversion of electrical energy to mechanical energy e.g. electric motors. Conversion of solar energy to electrical and heat energies e.g. solar cells, solar heaters, etc.
(f) Shunt and multiplier
(g) Resistivity and Conductivity
(h) Measurement of electric current, potential difference, resistance, e.m.f. and internal resistance of
- Magnetic field
(a) Properties of magnets; Magnetic materials.
(b) Magnetization and de-magnetization
(c) Concept of magnetic field
(d) Force on a current-carrying conductor placed in a magnetic field and between two parallel current-carrying conductors
(e) Use of electromagnets
(f) Earth’s magnetic field
(g) Magnetic force on a moving charged particle
- Electromagnetic field
(a) Concept of electromagnetic field. Use in conversion of a galvanometer into an ammeter or a voltmeter. Factors affecting the electrical resistance of a material should be treated. Simple problems may be set. Principle of operation and use of ammeter, voltmeter, potentiomete1, metre bridge, and
wheatstone bridge. Practical examples such as soft iron, steel and alloys.
Temporary and permanent magnets. Comparison of iron and steel as magnetic materials. Magnetic flux and magnetic flux density. Magnetic field around a permanent magnet, a current-carrying conductor and a solenoid. Plotting of lines of force to locate neutral points. Units of magnetic flux and magnetic flux density as weber (Wb) and tesla (T) respectively Qualitative treatment only. Applications: electric motor and moving-coil galvanometer. Examples in electric, bell telephone earpiece etc. Mariner’s compass. Angles of dip and declination. Solving simple problems involving the motion of a charged particle in a magnetic field. Identifying the directions of current, magnetic field and force in an electromagnetic field (Fleming’s left-hand rule).
(b) Electromagnetic induction Faraday’s law, Lenz’s law and motor-generator effect
(d) Eddy current
(e) Power transmission and distribution
- Simple a.c. circuits
(a) Graphical representation of e.m.f. and current in an a.c. circuit.
(b) Peak and r.m.s. values Applications: Generator (d.c. and a.c.), induction coil and transformer. The principles underlying the production of direct and alternating currents should be treated. Equation E = Eo sinwt should be explained.
Explanation of inductance. Henry as unit of inductance. Energy stored in an inductor
(E = 21 LI2)
Application in radio, T.V., transformer. (Derivation of formula is not required).
A method of reducing eddy current losses should be treated. Applications in induction furnace,
speedometer, etc. Reduction of power losses in high-tension transmission lines. Household wiring system should be discussed.
Graphs of equation I =Io sin wt and E = Eo sinwt should be treated.
Phase relationship between voltage and current in the circuit elements; resistor, inductor and
(c) Series circuit containing resistance, inductance and capacitance
(d) Reactance and impedance
(e) Vector diagrams
(f) Resonance in an a.c. circuit
(g) Power in an a.c. circuit
Simple calculations involving a.c. circuit. (Derivation of formulae is not required.) XL and Xc should be treated. Simple numerical problems may be set. Applications in tuning of radio and T.V. should
ATOMIC AND NUCELAR PHYSICS
- Structure of the atom
(a) Models of the atom
(b) Energy quantization
(c) Photoelectric effect
(d) Thermionic emission
- Structure of the nucleus
(a) Composition of the nucleus Thomson, Rutherford, Bohr and electron-cloud (wave-mechanical) models should be discussed qualitatively. Limitations of each model. Quantization of angular momentum (Bohr) Energy levels in the atom. Colour and light frequency. Treatment should include the following: Frank-Hertz experiment, Line spectra from hot bodies, absorption spectra and spectra of discharge lamps. Explanation of photoelectric effect. Dual nature of light. Work function and threshold frequency. Einstein’s photoelectric equation and its explanation. Applications in T.V., camera, etc. Simple problems may be set. Explanation and applications. Production of X-rays and structure of X-ray tube. Types, characteristics, properties, uses and hazards of X-rays. Safety precautions. Protons and neutrons. Nucleon number (A), proton number (Z), neutron number (N) and the equation: A=Z + N to be treated. Nuclides and their notation. Isotopes.
(b) Radioactivity – Natural and artificial
(c) Nuclear reactions – Fusion and Fission
- Wave-particle paradox
(a) Electron diffraction
(b) Duality of matter
Radioactive elements, radioactive emissions and their properties and uses. Detection of radiations by G – M counter, photographic plates, etc. should be mentioned. Radioactive decay, half-life and decay constant. Transformation of elements. Applications of radioactivity in agriculture, medicine, industry, archaeology, etc.
Chemistrythe chemical composition and properties of a substance or objectMore (Definitions, Synonyms, Translation)
thedefinite articleMore (Definitions, Synonyms, Translation)